In the home screen of the device, press the [Set] button to enter the interface of setting.
Please press the [▲][▼] button to move to the option of "Parm. Setting",and press the [Enter] button to enter.
After entering the interface of "Parm. Setting", press the [Enter] button to enter "System Setting".
After entering the interface of "System Setting",it turns out slope setting, then press the [▲][▼] button to switch on or off.
Please press the power-off button to exit after setting.

Note:When you need to measure slope,the slope setting should be ON.

Unit Setting

In the home screen of the device, press the [Setting] button to enter the interface of setting.
Please press the [▲][▼] button to move to the option of "Parm. Setting",and press the [Enter] button to enter.
After entering the interface of "Parm. Setting", select "Unit Setting" and enter.
After entering the interface of "Unit Setting", press the [Enter] button to switch the unit that need to be changed, and press the [▲][▼] button to change the specific content.
Please press the power-off button to exit after setting.

Features Of GPS Land Survey Equipment:

Parameters	S8
Receiver Chip	High Sensitivity GNSS Receiver Chip
Receiver Antenna	Taimeng Passive Large - Size flat plate antenna
Positional Time	3Hot Start Time: one Second; Cold Start Time: 30 Seconds
Positional Accuracy	Within 2 Meters (HDOP Value Less Than 1.0)
area Accuracy	Measurement error is not more than 0.03 Mu (1-3 Mu), 2% (More Than 3 Mu)
Distance Accuracy	)Within one Meter (When HDOP value is less than 1.0, measure the length of 100 meters)

Functional Characteristics	Coordinate Measurement, Route Edit, Track Record, Navigation Function, Altitude Measurement,
	Area Measurement, Distance Measurement,
	Lofting Function
Data Statistics	Area Statistics, Distance Statistics
Area Record	99 pieces	Waypoint	2000pieces
Distance Record	99 pieces	Track	100pieces
Route Record	Maximum Number Of Editions 200, Single Route Up To 400 Points